Wuhan Guide EasIR-4 Manual de usuario descargar pdf (Pagina 17)

User Manual

Function operation

Thermal camera focusing

There are two methods to adjust focus: motorized and automatic

To motorizedly focus:

 Aim the lens at the target

 Press

to activate the menu

 Press the softkey labeled “Far” and “Near” until the image on the LCD is as clear as possible

To automatically focus:

 Aim the lens at the target

 Press

to activate the menu

 Make sure the target is in the middle of the LCD, and then press the softkey labeled “Auto” until the image on the

LCD is as clear as possible.

Image capturing and saving

 Aim the lens at the target of interest and adjust the focus motorizedly or automatically above to get a clear image on

the LCD, and then pull the trigger to capture an image. The image will be frozen and bring up the image capture

menu.

 Press the softkey labeled “Save”. If the SD card is in the camera, the image data will be acquiescently saved in the

SD card.

Selecting the Palette

 Press button to display main menu.

 Press button

to enter Parameter

 Select sub-menu Palette

 Press button or button to shift among different palettes

 Press button

to confirm.

Setting Tmin and Tmax

When there is no menu on the screen, keep button

depressed to switch between the manual mode and

automatic mode.

AutoSpan ManualSpan

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Sin comentarios

Wuhan Guide EasIR-4 Manual de usuario Pagina 17